This is where our company started. We take great pride
in all of our residential projects. We have protected
everything from bird houses to homes having as much as
65,000 square feet. We offer a wide range of installations,
designed by us, to meet the needs of our customers.
TYPICAL
DESIGN OF A LIGHTNING PROTECTION SYSTEM INSTALLED ON A
RESIDENCE. However, every system must be specifically
designed to provide air terminals at all locations vulnerable
to a lightning strike, and all air terminals must provide
multiple paths to an adequate grounding system.
Our territory for surveying a residence is 100 miles from
Dayton, Ohio. Also, we will survey 50 miles from Columbus
and Zanesville.
![Residential Assessment Area [ Maxwell can send someone to personally estimate a residence within these areas].](../../images/services/resmap.jpg)
However, others outside of this area who wish to obtain
our services can do so by sending a sketch, pictures and/or
a drawing of the residence to be protected. We will be
happy to serve you.
To obtain
a complete, no-cost estimate for lightning protection
on your property, send a drawing of the building you wish
to protect. These sketches do not have to be masterpieces
of art, outlines only are fine, but the better they are
the more accurate and complete our estimates will be.
As an alternate to hand drawn views, you may use photographs
of the areas. This should include length and width
of the structure-- including all dormers, side wings,
porches and decks, etc., and also the height from ground
to eave line or roof edge, and height to roof peaks.
Again, be sure to include dormers and wings, etc.
Also show the approximate location of gutters, downspouts,
plumbing vents, attic vents, all chimneys and outside
water faucets (hose bibs). In addition to the above,
please answer the following:
